6308CT

»Home »Product Andalan »JENCO Instrument »JENCO Conductivity, TDS & Salinity » 6308CT

6308CT

6308CT

Description

Conductivity analyzer, 1/4 DIN panel mount single parameter analyzer with an IP-65 case, and selectable 2 or 4- wire cells. Has programmable reference temperature and coefficients. The 4-20 mA output is fully programmable, reversible and isolated. There are 2 programmable relays for conductivity and one relay for temperature and an RS-485 interface. Password & ID protected. Graphical display. CE approved. 115/230V AC.
  • Bumpless calibration
  • CE approved
  • RS-485 output
  • Programmable relays for conductivity
  • Reversible and isolated 4 to 20ma output
  • Programmable relay for temperature
  • Conductivity/temp.measurement & control
  • Simultaneous analysis and display for measurement and controls
  • User programmable reference temperature temperature coefficient
  • Selectable 2-wire or 4-wire cells for long cable length & wide measurement range

Specifications

 

Range

Resolution

Accuracy

Cond.

0 uS to 5.0 mS

0.01 uS to 0.1 mS

0.5% ± 1 LSD

TDS

0 ppm to 150.0 ppt

0.01 ppm to 0.1 ppt

0.5 % ± 1 LSD

Temp.

-10.0 to 120°C

0.1 °C

± 0.1 °C

Conductivity

  • Reference temperature: 1.5 °C to 25.0 °C
  • Temperature coefficient: 0.0 % to 40.0%
  • Basic cell constant: 0.01,1 and 10.0
  • Cell constant range: ±30% of basic cell constant

Output Relays

  • Output relays numbers: Two programmable high or low relays for conductivity
  • Control type: On/off
  • Relay output (resistive load only): 5amps at 115 VAC, 2.5 amps at 230 VAC
  • Relay set point hysteresis: User programmable

Current Output

  • Current output: Isolated 4 to 20 mA
  • Range: Selectable zero, & span
  • Accuracy: ±0.02mA
  • Isolated voltage: 500 VDC
  • Maximum load: 500 ohms

General

  • ATC sensor: Thermistor 10kiloohms at 25 °C
  • Security protection: 4digit password
  • Keypad: Audio feedback
  • Communication: RS-485
  • Display: Graphic LCD w/backlight
  • Power source: 115/230 VAC, 50/60hz
  • Dimensions: 1/4 DIN, depth 148 mm
  • Weight: 950 gm