Digital Sling Psychrometer Accessory - ARH4

»Home »Product Andalan »fieldpiece »Thermometer » Digital Sling Psychrometer Accessory - ARH4

Digital Sling Psychrometer Accessory - ARH4

The AHR4 Digital Sling Psychrometer reads air temperature and %RH (relative humidity) and displays wet bulb and dew point on your meter. Perfect for finding you target superheat.

The Fieldpiece model ARH4 Digital Sling Psychrometer Accessory Head measures both relative humidity and ambient air temperature. It calculates dew point and wet bulb. It’s great for calculating target superheat as well as logging %RH, temp, WB or DP over time.  The head converts %RH, ambient temperature, dew point temperature, and wet bulb temperature to a voltage at a rate of 1 %RH or degree to 1mVDC and your reading is displayed on your meter.  The ARH4 snaps directly onto Fieldpiece stick meters, data logger, electronic handles and adapters.

 

The ARH4 employs an advanced pair of sensors, a thermistor and a hygrometer, that sense temperature and moisture in the air.  With built-in psychometric charts, the ARH4 calculates dew point and wert bulb based on these direct measurements. For the most accurate readings, expose the ARH4 to the air you are measuring for a few minutes so that the sensors can come to equilibrium.

Operation

  1. Remove protective cap covering sensor at the top.
  2. Connect to COM and Volts jacks. To use with any Fieldpiece “stick” meter, slide the head over the meter. For most other meters with mVDC ranges, use the Fieldpiece ADLS2 test leads or AHDL1 adapter handle.
  3. Select parameter you want to read on accessory head.
  4. Select mVDC range on meter and read parameter directly on meter.


About dew point and wet bulb
The "dew point" is the temperature at which water vapor condenses forming fog or dew. Wet bulb is the temperature measured after cooling by evaporation of water. If you know temperature and relative humidity, dew point and wet bulb temperatures can be calculated.  The ARH4 measures relative humidity and ambient temperature. The ARH4 calculates wet bulb and dew point temperatures for you.

 

Features and Benefits

Designed for HVAC/R the ARH4 Digital Sling Psychrometer Accessory Head is used for a variety of HVAC/R field service functions. 

  • Measures Temp and RH%
  • Calculates wet bulb and dew point temperatures
  • Get outdoor dry bulb and indoor wet bulb for target superheat calculations
  • Log relative humidity over time and troubleshoot systems
  • English and Metric units
  • Auto Power-Off (APO) to extend battery life, with override switch for data logging and extended test times.

 

Competitive Advantages

The modular design of the ARH4 gives it a distinct advantage over other digital psychrometers.  The thermistor and hygrometer are highly accurate and designed specifically to stand up to HVAC/R field service.  Many competitive standalone psychrometers do not include calculations for wet bulb like the ARH4.  Remote the ARH4 with our detachable test leads to isolate the area you’re testing and measure or log readings in hard to reach areas.  Like all of our accessory head instruments, the modular design means it takes up less space on the truck while providing accurate measurements and calculations.

INCLUDED

  • Digital Sling Psychrometer and Hygrometer Accessory - ARH4
  • 9V battery (installed)
  • Operator’s manual

 

Recommended Accessories and Replacement Parts

Technicians who like the ARH4 may also enjoy these instruments and accessories:

 

 

Expandable True RMS Stick Multimeter with Backlight - HS36

Our top of the line True RMS Stick Meter, the HS36 includes the ranges you use everyday for HVAC/R field service plus includes a bright blue backlight and True RMS. Like the rest of the HS30 series, the HS36 comes equipped with a magnetic hanger, along with detachable silicone test leads and alligator clip probe tips for remote and easy one-handed testing, as well as the full set of built-in safety features.  This auto-ranging stick meter also includes a bar graph on the LCD for an analog feel. Technicians who prefer our expandable stick meters tell us this is the best digital multimeter for HVAC/R field Service.

EHDL1-SRC-product-tmb

Electronic Handle - EHDL1

Convert any Fieldpiece accessory head instrument into a standalone with the Electronic Handle model EHDL1. It features a MAX/MIN button to record the highest and lowest reading. And a HOLD button to hold the reading. The EHDL1 has a 200 and 2000 mVAC for use with our Amp Clamp, model ACH4 and the 200 and 2000mVDC range is for use with the rest of our accessory head instruments.

 

ADMN2-SRC-product-tmb

Dual-Port Manometer Accessory – ADMN2

The ADMN2 is a portable dual port manometer accessory head for use with our modular multimeters (DMMs) and instruments. Measures gas pressure, static pressure and pressure differential. The ADMN2 includes a zero adjust and the Auto Power-Off (APO) function conserves battery life. Disable APO for data logging. The ADMN2 measures pressure between -60inWC and 60inWC (inches of water column) and -150.0 to 150.0 mBar. The ADMN2 also measures P1 or P2 pressure readings and calculates the difference between P1 and P2. Take static pressure measurements using the resolution mode of 0.01inWC or 0.01mBar.

 

SDMN5-SRC-product-tmb

Dual-Port Manometer - SDMN5

The SDMN5 is a portable, rugged dual-port manometer designed especially for HVAC/R field service technicians. Measures gas pressure, static pressure and pressure differential. The SDMN5 includes a zero adjust button of the face of the meter, a rugged rubber boot, a magnet on the back for hanging the meter during service, and the Auto Power-Off (APO) function conserves battery life. The SDMN5 measures pressure between -60inWC and 60inWC (inches of water column) and -150.0 to 150.0 mBar. The SDMN5 also measures P1 or P2 pressure readings and calculates the difference between P1 and P2. Take static pressure measurements using the resolution mode of 0.01inWC or 0.01mBar. Includes 3/16” to 5/16” adapter for measuring gas inlet and outlet pressures.

Specifications

TECHNICAL SPECIFICATIONS
Low battery indication: Red LED is lit when the voltage drops below the operating level.
Output impedance: 500Ω approx
Operating environment: 32OF to 120ºF (0 ºC to 50 ºC) at <95%RH
Storage temperature: -4ºF to 140ºF (-20ºC to 60ºC) <80%RH with battery removed
Accuracy: Stated accuracy at 73ºF±10ºF (23º±5ºC), <95%RH
Battery: 9V
Dimensions: 146mm(H) x 67mm(W) x 32mm(D)
Weight: approx. 180g including battery

Temperature
Sensor:
thermister temperature sensor
Range: -4°F to 140°F (-20°C to 60°C)
Resolution: 0.1°C / 0.1°F
Accuracy:
±1°F 32°F to 113°F
±2°F -4°F to 32°F,
113°F to 140°F
±0.5°C 0°C to 45°C
±1°C -20°C to 0°C,
45°C to 60°C
Output: 1mV/°C,1mv/°F

Relative Humidity
Sensor: Capacitive humidity sensor
Range: 0% to 100%RH
Accuracy:
±2.5%@77°F(25°C), 10% to 90% RH
±5%@77°F(25°C), 90%RH
Output: 1mV/%RH
Sensor response time: 60 seconds typical for 90% of total range
Sensor hysteresis (excursion of 10% to 90% to 10% RH): ±1%RH typical