A73601983 nXDS10i 100 - 127 V, 200 - 240 V, 1ph 50/60 Hz

»Home »Product Andalan »EDWARDS »Small Wet/Dry Pumps » A73601983 nXDS10i 100 - 127 V, 200 - 240 V, 1ph 50/60 Hz

A73601983
nXDS10i 100 - 127 V, 200 - 240 V, 1ph 50/60 Hz

A73601983 - nXDS10i 100 - 127 V, 200 - 240 V, 1ph  50/60 Hz

Overview

The nXDS10i is the next generation in completely oil free, dry scroll pumps and replaces the XDS10. nXDS improves on legacy XDS pumps by offering increased pumping speeds, combined with lower ultimate pressures, lower power consumption and lower noise. Gas ballast allows for pumping of condensable vapours including, water, solvents, dilute acids and bases.  nXDS pumps also feature the latest in tip seal technology giving significantly longer life between tip seal changes. Integrated inverter drive with auto sensing voltage input delivers optimized pumping performance globally. nXDS pumps are designed to be completely field serviceable.
 

Applications

  • General clean pumping applications
  • Scanning Electron Microscopes - SEM
  • Beam lines and high energy physics
  • Backing turbo pumps
  • Centrifuges, ultra-high speed
  • Coating
  • Cryogenics
  • Degassing/curing - oil, epoxy resin
  • Distillation/extraction/filtration
  • Freeze drying
  • Furnaces
  • Gel drying
  • Laboratory bench top vacuum
  • Lasers, gas recovery and recirculation
  • Leak detectors, Helium
  • Load locks and transfer chambers
  • Rare gas recirculation
  • Rare gas recovery
  • Refrigeration manufacture
  • Research and development
  • Rotary, centrifugal evaporators
  • SEM/FIB (ion beam repair)
  • Solvent recovery
  • Surface science instruments

Technical Data

Nominal rotational speed 1800 rpm
Displacement 12.7 m3h-1  /  7.5 ft3min-1  
Peak pumping speed 11.4 m3h-1  /  6.7 ft3min-1  
Ultimate vacuum (total pressure) 0.007 mbar  /  0.005 Torr
Minimum standby rotational speed 1200 rpm
Speed control resolution (percentage of full rotation speed) 1%
Pumping speed at minimum rotational speed 7.5
Maximum continuous inlet pressure 200 mbar
Motor power 1-ph 280 W
Power connector 1-ph IEC EN60320 C13
Recommended fuse 10A, 250Vac rms
Weight 25.8 kg  /  57 lb
Inlet flange NW25
Exhaust flange NW25
Noise level 52 dB(A)
Vibration at inlet flange < 4.5 mms-1   (rms)
Leak tightness (static) < 1x10-6 mbar ls-1  
Operating temperature range 10 to 40 °C  /  41 to 104 °F