MITECH LX-F Shore Hardness Tester
In order to measure the hardness of foam, we special tailor-Made the LX-F type sponge durometer to facilitate our customers. It is suitable for the determination of soft foam,polyurethane foam rubber products’hardness.And itwill be different with the other hardness tester In the aspects of using.When using,the presser foot directly contact to the sample,and see it sown weight as force measuremen tload.
1.Scope of pressure needle route:0~2.5millimeters.
2.The scale value:0-100 degrees.
3.The force of pressure needle end:550mN~4300mN（56~438.5g).
The method of using
Held the middle of the instrument,located the hardness tester gently on the plane.
Specimens which is bigger than presser foot(orspecimen).Reading out the value in
1 second when durometers’presser foot contact with the samples moothly.And the tick
of pointers is the hardness value of sample (specimen). In order to improve the
accuracy of measurement, you should putthe sample on a flat plate glass or plate.
Each measuring point should be measured only on